Engineers talk about tolerances, the degree to which a component can vary from a specification – and also whether that is plus, minus or ±. These two things, the specification and the tolerance, are the very definition of standards. The finer (smaller) the tolerances, the finer the standard and the greater the precision. Simple. But the standard is the standard, and the tolerance is the tolerance, regardless of the degree of precision.
And here, I think, lies the problem. When people hear or see the word “standards” they automatically add the qualification “high”, or even “very high” even if it isn’t there. But let’s be clear, even if you buy things off the shelf, they have been made to a standard: to ensure maximum sales potentials, track will have defined standards for gauge and flangeways, and wheels will have defined back to back and flange profiles. These can be defined in various ways, such as “track gauge equals check gauge plus flangeway” and “back to back equals check gauge minus glance width”, but the point is, by buying off the shelf, a modeller has already implicitly accepted these standards, albeit unknowingly in many cases.
Finescale is about accepting the degree to which perfection is unattainable. Whilst “exact scale” may be used to set an accurate track gauge, etc, the physical world of engineering tolerances means that is not fully achievable. This is liberating, as it points to the need to allow for a degree of imperfection. Finescale is therefore all about setting standards: not just for track and wheels, but about everything: level of detail, contemporaneously correct details, etc. It’s an attitude of mind. This acknowledgement and definition of standards is the definition of how we wish to achieve our aims. And the measure of success is gauged against these standards. And this is where the pitfalls lie and misunderstandings arise.
- This is an entirely personal and individual choice: what works for me may not work for you.
- Similarly, not consciously adopting or defining standards is a perfectly feasible alternative: if buying off the shelf works for you, then by all means do so, but please don’t think you have avoided having standards by accepting someone else’s.
- The fact that I have defined my personal standards does not mean I think I am in any way “better” than anyone else. It’s just my way of doing my hobby. If you resent my active choice of standards, that’s says nothing about me but a lot about you.
- Working to a tighter degree of tolerance takes more time. I might achieve “less” in terms of quantity, but that’s not what I want.
- This in no way contradicts the “good enough” concept: it is entirely congruent with it.. I am not building an operationally-focused “basement empire”, so replacing cast details is fine by me: that’s how I enjoy my modelling. If I had the space and desire for a large operations oriented layout, I would be using RTR equipment, modified, repainted and weathered to be sure, but everything would be subordinate to the aim of creating that dream, which has to be balanced against the time I have available.
- As a corollary to all the above, what works for you in your circumstances probably won’t work for me in mine, so please don’t force your secret of success on me, or tell me that it is the only way to happiness.
This post, and the last two, was inspired by Mike Cougill’s recent post on inspiration, whose wonderful blog continues to a haven for the sane, rational and thoughtful amongst the hobby.